TD2u Forensic Duplicator

£1,329.00
(Requiring Expansion)

SUMMARY

The Tableau Forensic Duplicator was built to excel in both field and lab environments. It is a full-featured, fully-forensic duplicator that offers the ideal combination of easy operation, reliability, and ultra-fast forensic imaging of hard disks and solid-state-drives.

Winner of the Forensic 4:cast “2016 Computer Forensic Hardware of the Year” award.

A Tableau third-generation product, replacing the Tableau TD2.

FEATURES

Image SATA, USB 3.0, and IDE hard disks natively

Image SAS drives with the SAS Expansion Module

Standard operations:

  • Disk-to-Disk (clone) duplication
  • Disk-to-File (image) duplication
  • Format
  • Wipe
  • Hash (MD5 or SHA-1)
  • HPA/DCO detection and removal
  • Blank Disk Check

Imaging speeds in excess of 15 GB/minute (.e01, compressed with MD5 and SHA-1 hashing)

Forensic mode always on (MD5 and SHA-1 hashing)

Capable of making one (1:1), two (1:2), or three (1:3) forensically-sound copies of digital storage devices

Outputs to raw DD, .e01 (compressed), .ex01 (compressed), or .dmg formats

Wiping speeds in excess of 25 GB/minute

Supports whole disk encryption of destination drives

Includes a color LCD for crisp, easy-to-view operational and device status information

Intuitive user interface provides easy operation with minimal training

Nine LEDs provide status on power, source drive detection, destination drive detection, and activity

Packaged in removable foam inserts custom-built to drop into a Pelican 1500 hard case

Free Tableau firmware updates

Compatibility
IDE Devices Parallel ATA hard drives with Logical Block Addressing (LBA) support
Power Supply Tableau model TP4 or TP5
SATA Devices SATA I, II, or III hard drives
USB Devices USB 3.0, 2.0, and 1.1 devices
Connectors: Destination Side
Drive Power Two 3M-style 4-pin power connectors for the SATA drive
SATA Two SATA signal connectors
USB 3.0 One USB 3.0 Standard-A connector
Connectors: Misc
One Mini-B USB 2.0 port for firmware updates
DC Input One barrel connector for use with Tableau TP5 power supply
USB One Standard-A USB 2.0 port for USB printer, flash drive, or keyboard
Connectors: Source Side
Drive Power One 3M-style 4-pin power connector for the SATA or IDE drive
IDE One IDE signal connector
SATA One SATA signal connector
USB 3.0 One USB 3.0 Standard-A connector
Physical / Environmental
DC Input 13VDC (min) to 36VDC (max)
DC Output +5/12V @2A (spin-up)
DC Output (per drive) +5/12V @1A (continuous)
Dimensions 5.65 in. (L) x 5 in. (W) x 2.25 in. (H)
Operating Temperature Range 0 to 40 degrees C ambient (room temperature)
Power 11 Watts Typical Operating (Not Including Drive Power)
Relative Humidity Up to 90% (non-condensing)
Storage Temperature Range -40 to 70 degrees C
Weight 11.3oz (320g)
Status LEDs
Alert Flashing: activity paused, user response required
Alert Steady: read/write failure encountered
Busy Source or destination drive activity
DC Power In Power is available at power source
IDE Source Detect Flashing: detecting drive
IDE Source Detect Steady: drive detected
Power TD2u is powered on
SATA Destination 1 Detect Flashing: detecting drive
SATA Destination 1 Detect Steady: drive detected
SATA Destination 2 Detect Flashing: detecting drive
SATA Destination 2 Detect Steady: drive detected
SATA Source Detect Flashing: detecting drive
SATA Source Detect Steady: drive detected
USB Destination Detect Flashing: detecting drive
USB Destination Detect Steady: drive detected
USB Source Detect Flashing: detecting drive
USB Source Detect Steady: drive detected
User Interface
Buttons Two contextual "soft buttons" located under the LCD, five navigation buttons and one power on/off button
LCD 3.5 in. Graphic LCD (320 x 480 resolution)
Warranty
One year parts and workmanship from date of purchase